Electronics

100A PCBA, Condensate Alarm Board Model: 1095E ** Note: Please contact factory if your unit was built before July 1, 2015.**

The 3103-0018 Subminiature Pressure Switch interfaces from pressure to electrical control circuits. Ideal for high pressure and low differential applications. The switch is adjustable 0.5 - 15 PSI with a maximum of 15 PSI supply. The switch has...

PCBA, Alarm Circuit Relay Board, Dual Channel Model: 540, 570, 574, 1080, 1090, 1390, 1490 ** Note: Please contact factory if your unit was built before July 1, 2015.**

PCBA Alarm Relay Circuit Board, Single Channel Model: 520, 530, 560, 1040, 1050, 1060 ** Note: Please contact factory if your unit was built before July 1, 2015.**

PCBA, 115VAC Blowback Timer Board

Cable Assembly, WCO/WCOF, 2' Long with Connector on one end Note: Only fits Legacy product WCO & WCOF

Cable Assy, WCO/WCOF Extension, 16" Long With Connectors On Both Ends Note: Only fits Legacy product WCO & WCOF

Cable Assy, WCO/WCOF Extension, 2' Long With Connectors On Both Ends Note: Only fits Legacy product WCO & WCOF

Cable Assy, WCO/WCOF Extension, 3' Long With Connectors On Both Ends Note: Only fits Legacy product WCO & WCOF

Cable Assy, WCO/WCOF Extension, 6' Long With Connectors On Both Ends Note: Only fits Legacy product WCO & WCOF

Cable Assy, WCO/WCOF Extension, 7" Long With Connectors On Both Ends Note: Only fits Legacy product WCO & WCOF

Pigtail Red/Blue TLC21257 Rev-(Rev.A) Smr-02V-B Used on 4955-0247 Cal Gas Valve  

PCBA Controller Board, 15-24 VDC Models: 512, 513, 514, 624, 634, 644 ** Note: Please contact factory if your unit was built before July 1, 2015.**

PCBA Controller Circuit Board, Dual Channel Model: 540, 570, 574, 1080, 1090, 1390, 1490

PCBA, Controller Circuit Board, Single Channel Model: 520, 530, 560, 1040, 1050, 1060

Beige direct mount End Bracket for Din Rail #Da602. The EW 15 end bracket that guarantees a permanent, reliable mounting on the terminal rail and prevents sliding. It is suitable for use with the screw fixing and for the terminals version. TS 15...

Beige connector DIN rail mount terminal block, 2 Positions, 24 AWG, 12AWG, Screw, 32 Amp Beige UL, CE, IECEX - SIRA and CSA approved UL94 V-2 flammability rating Dimension of terminal block is 27mm x 29mm x 6.1mm (L x H x W) Continuous operating...

PCBA, Display Board (FM Approved) Model: 3000, 3100

Switch Flow 560cc/Min Air Normally Open Acrylic Body 1/8" Ports  

Fuse, Cartridge, Time Delay, 2 Amp, 250 V, 6.4mm x 31.7mm, 1/4" x 1-1/4", MDL Series Used in control board for cooler models: 500, 1000, 1390, 1490

Fuse, Cartridge, Fuse 12 Amp 3AB 250V, 0.25"x1.25" Cylindrical Used in power supply board for cooler models: 570, 574, 1060, 1080, 1090, 3040, 3050, 3080

Fuse, Cartridge, Fuse 6 Amp 250V Time Delay, 0.25"x1.25" Cylindrical Used in power supply board for cooler models: 512, 513, 514, 520, 530, 560, 1040, 1050, 3040, 3050, 3080

Power Cord with Molex connector Assembly 115 VAC

PCBA Power Supply Board, 250W, 115VAC or 230VAC Jumper Selectable, Short Bar Model: 500 Series (520, 530, 540, 560, 570)

PCBA Power Supply Board, 250W, 115VAC or 230VAC Jumper Selectable, Long Bar Model: 100 Series (1040, 1050)

PCBA Power Supply Board 500W Model: 3000, 3100 ** Note: Please contact factory if your unit was built before July 1, 2015.**

PCBA Power Supply Board 500W, 115VAC or 230VAC Jumper Selectable Model: 574, 1060, 1065, 1080, 1090

Pressure Sensor Transducer, Cylinder Pressure: 15PSI (103.42kPa) Pressure Type: Absolute Maximum Pressure: 45PSI (310.26kPa) Operating Temperature: -40°C ~ 105°C Output: A4 mA ~ 20 mA Port Size: Male - 1/4" (6.35mm) NPT 

Relay, Solid State Input Voltage 3-32 VDCOutput Voltage 24-280 VACMaximum Load 10 AmpsNo Heatsink

Relay, Solid State Input Voltage 3-32 VDCOutput Voltage 24-280 VACMaximum Load 25 AmpsNo Heatsink

Relay, Solid State Input Voltage 3.5-32 VDCOutput Voltage 1-100 VDCMaximum Load 20 AmpsNo Heatsink

Relay, Solid State Input Voltage 85-240 VACOutput Voltage 24-280 VACMaximum Load 25 AmpsNo Heatsink

Axial-leaded standard recovery diode plastic rectifier with an epoxy molded case (1N4004G) Cathode indicated by polarity band 480V Non-repetitive peak reverse voltage 280V RMS reverse voltage General purpose and low-power applications

General Purpose Temperature Switch Thermal Activated Normally Closed Below 225°F Selco NON FM (NOT HERMETIC) blue leads

Class 1 Division 2 & ATEX Zone 2 Temperature Switch Thermal Activated Normally Closed Below 225°F Hermetically sealed Selco blue leads  

General Purpose Temperature Switch Thermal Activated Normally Closed Below 340°F Selco NON FM (NOT HERMETIC) blue leads

Class 1 Division 2 & ATEX Zone 2 Temperature Switch Thermal Activated Normally Closed Below 340°F Hermetically sealed Selco blue leads  

Temperature Switch Thermal Activated Normally Closed Below 375°F

Temperature Switch Thermal Activated Normally Closed Below 550°F

Temperature Switch Thermal Activated Normally Open Below 185°F 0.6" OD x 6-32 Thread